PicoSure for Pigmentation: How Picosecond Lasers Treat Spots

November 6, 2026

This is a subtitle for your new post

PicoSure for Pigmentation: How Picosecond Lasers Treat Spots

Quick answer: PicoSure is a picosecond laser that fires extremely short pulses of 755 nm energy to break pigment into tiny fragments, which the body then clears over the following weeks. It is used for sun spots, some birthmark-type pigmentation, tattoos and, carefully, for melasma. Most people need a series of sessions rather than one, and results vary with the type and depth of the pigment.

What is PicoSure?

PicoSure is a laser platform made by Cynosure. The current version, PicoSure Pro, delivers 755 nm light in pulses measured in picoseconds, which are trillionths of a second. Older pigment lasers, usually called Q-switched lasers, work in nanoseconds, which are about a thousand times longer.

The manufacturer describes PicoSure Pro as cleared by the FDA to treat melasma pigment, nevus of Ota and Hori's nevus in all skin types, and also markets it for unwanted pigment, wrinkles, acne scars and pores. In Korea, picosecond lasers are widely used, and you will often see them on clinic menus simply as "pico" or "pico toning."

How do picosecond lasers treat spots?

Pigment lasers work on a simple principle. The laser light is absorbed by melanin or ink particles, and the energy breaks those particles apart. Your immune cells then carry the fragments away over several weeks.

The difference with a picosecond laser is the speed of the pulse. A review of laser treatment in Asian skin explains that very short pulses act mainly through a photomechanical, or photoacoustic, effect: the pigment is shattered by a rapid pressure wave rather than by heat alone. Less heat spreading into the surrounding skin is one reason picosecond devices are thought to be gentler on darker or more reactive skin types, although large comparative trials are still limited.

There are two common ways the PicoSure is used:

  • Spot treatment: a higher-energy pulse aimed at individual sun spots or freckles. The spots darken, form fine crusts and then flake off.
  • Low-energy "toning": gentle passes across the whole face, used for diffuse dullness or melasma. This is done in a series with little visible downtime.

Some devices also use a special lens array that concentrates energy into tiny points to stimulate collagen. Cynosure markets a "Focus" lens for this, and clinics use it for texture and pores.

Which pigmentation does PicoSure treat?

Not all brown marks are the same, and that matters for whether a laser is a good idea. Picosecond lasers are commonly used for:

  • Sun spots (solar lentigines): flat, well-defined brown spots on sun-exposed skin. These often respond well to spot treatment.
  • Freckles: they lighten, but new freckles can appear with future sun exposure.
  • Dermal pigment such as nevus of Ota or Hori's nevus: these sit deeper in the skin and usually need several sessions spaced months apart.
  • Melasma: treated only with low energy and caution, usually alongside creams and strict sun protection, because aggressive laser can make melasma worse.
  • Tattoos: picosecond lasers were originally developed with tattoo removal in mind.

A doctor should examine any spot before laser treatment. Some pigmented lesions, especially ones that are changing, irregular or new in adulthood, need to be checked for skin cancer first.

How many sessions will you need?

This depends mostly on what is being treated. Individual sun spots may need one to three sessions. Deeper dermal pigment usually needs more, often with longer gaps between visits. Melasma toning is normally planned as a series, and maintenance is often needed because melasma tends to come back.

Your doctor will usually space treatments a few weeks apart for toning and longer for deeper pigment. Ask for a written plan that states the number of sessions, the interval and what result is realistic for your type of pigment.

What does treatment feel like, and what is the downtime?

Most people describe a snapping sensation like a rubber band. Numbing cream is often used for spot treatment. Toning passes are usually tolerated without numbing.

After spot treatment, treated spots often turn darker and form thin crusts that flake off over roughly one to two weeks. Mild redness and swelling are common for a day or two. After toning, the face may look slightly pink for a few hours.

Possible side effects include:

  • Temporary redness, swelling and pinpoint bleeding
  • Post-inflammatory hyperpigmentation, a temporary darkening that is more likely in darker skin or with sun exposure
  • Lightened patches (hypopigmentation), especially with repeated or overly strong treatment
  • Rarely, blistering or scarring

The review of Asian skin notes that higher melanin content raises the risk of pigment reactions after laser, which is why settings must be adjusted carefully for each person.

How should you care for your skin afterwards?

  • Use a broad-spectrum sunscreen every day and reapply when outdoors. Sun exposure is the main reason spots return or darken after laser.
  • Let crusts fall off on their own. Picking them increases the risk of marks.
  • Keep your routine gentle for several days: a mild cleanser, a plain moisturizer and no scrubs, peels or strong retinoids unless your doctor says otherwise.
  • Avoid saunas, intense exercise and alcohol for a day or two if your skin is red or swollen.
  • Contact the clinic if you notice blistering, oozing, spreading redness or pain that is getting worse.

Frequently asked questions

Is PicoSure better than a Q-switched laser?

Picosecond lasers break pigment with less heat, which may mean fewer sessions for some pigment and possibly a lower risk of irritation. However, a Q-switched laser can still work well for many spots. The skill of the person choosing the settings often matters as much as the device.

Can PicoSure remove melasma permanently?

No laser removes melasma permanently. Low-energy picosecond treatment may lighten it as part of a combined plan, but melasma is a long-term condition that can return with sun, heat and hormones.

Is PicoSure safe for darker skin?

It can be used on a range of skin tones, but the risk of temporary darkening is higher in darker skin. A test area, conservative settings and strict sun protection lower that risk.

When will I see results?

Sun spots usually look lighter once the crusts fall off, after one to two weeks. Deeper or diffuse pigment fades more gradually over several weeks to months.

This article is for general information and does not replace a consultation with a doctor. Results and suitability vary from person to person.

Sources: Cynosure: PicoSure Pro is here; PubMed Central: Kono et al., review of laser treatment for pigmented lesions in Asian skin (Laser Therapy, 2016)

Korean vs Imported Botox Brands: Does It Matter?
November 21, 2026
Korean and imported botulinum toxin brands all work the same basic way: they relax targeted muscles to soften wrinkles or slim the jaw. In the korean botox…
Botox vs Skin Botox: Muscles vs Pores
November 21, 2026
Regular Botox is injected into muscles to relax them and soften expression lines such as frown lines and crow's feet. Skin Botox, also called micro Botox…
Botox vs Filler: What Each One Actually Fixes
November 21, 2026
Botox (botulinum toxin) relaxes muscles to soften wrinkles caused by movement, such as frown lines, forehead lines and crow's feet. Fillers, most often…
Silhouette Soft vs Barbed PDO Threads
November 21, 2026
Silhouette Soft is a branded absorbable suspension thread that uses small cones to hold tissue, made from a poly-L-lactic acid-based material, while barbed…
Thread Lift vs HIFU: Which Lasts Longer?
November 21, 2026
A thread lift places absorbable threads under the skin to physically reposition tissue, while HIFU uses focused ultrasound to heat deep layers and trigger…
HIFU vs RF Lifting: What's the Difference?
November 20, 2026
HIFU (high-intensity focused ultrasound) focuses sound energy into small points at fixed depths, including the deep support layer under the skin, to lift…
Coolfase vs Thermage: Pain, Downtime and Results
November 20, 2026
Coolfase and Thermage FLX are both monopolar radiofrequency (RF) devices that heat the dermis to tighten skin and stimulate collagen. In the coolfase vs…
XERF vs Thermage FLX
November 20, 2026
XERF and Thermage FLX are both monopolar radiofrequency (RF) skin tightening devices that heat the dermis to firm the skin and stimulate new collagen. The…
Cool Soniq vs Ultherapy: Cooled vs Classic Ultrasound
November 20, 2026
Cool Soniq is a Korean high-intensity focused ultrasound (HIFU) device made by Asterasys that cools the skin surface during treatment, while Ultherapy is…
ONDA vs InMode for a Double Chin
November 20, 2026
ONDA uses DEKA's Coolwaves microwave energy to heat fat and the skin above it, while "InMode" in Korean clinics usually means a combination of Forma…