Coolfase vs Thermage: Pain, Downtime and Results

November 20, 2026

This is a subtitle for your new post

Coolfase vs Thermage: Pain, Downtime and Results

Quick answer: Coolfase and Thermage FLX are both monopolar radiofrequency (RF) devices that heat the dermis to tighten skin and stimulate collagen. In the coolfase vs thermage comparison, Coolfase is a newer Korean device built around a direct-contact cooling system intended to improve comfort, while Thermage FLX is the long-established original with a longer track record. Both have little downtime, and results are gradual and modest. Comfort and outcomes vary with settings and the person.

What are Coolfase and Thermage FLX?

Thermage FLX, made by Solta Medical, is the fourth generation of Thermage. It received FDA 510(k) clearance in 2017 to non-invasively smooth skin on the face, eyes and body. It uses an energy algorithm called AccuREP that measures tissue and adjusts energy automatically, and a vibrating handpiece to improve comfort.

Coolfase is made by Asterasys, a Korean company. It received manufacturing approval from Korea's MFDS in April 2024 and FDA 510(k) clearance in October 2025. According to the FDA summary, it is a monopolar electrosurgical device operating at 6.78 MHz, with three tips: 0.25 cm² for small areas such as around the eyes, 4.0 cm² for the face and 16 cm² for the body. Asterasys describes its cooling as direct-contact cooling.

How do coolfase vs thermage differ?

Both devices pass RF current from a tip through the skin to a grounding pad. The skin's resistance turns the current into heat in the dermis, which tightens collagen and triggers new collagen over months.

The main difference is how the surface is cooled. Thermage FLX uses bursts of cryogen spray around each pulse. Coolfase uses direct contact cooling, which the company presents as a way to protect the skin surface and improve comfort. Coolfase is also generally priced lower in Korea than Thermage FLX.

Which is more painful?

Monopolar RF typically feels like short bursts of deep heat. Thermage FLX can be uncomfortable at higher energy, though vibration and cooling help. Coolfase is marketed as more comfortable because of its cooling design.

Pain depends on energy level, area and individual sensitivity. Many clinics apply numbing cream before either treatment. If the heat is too strong, ask the operator to adjust. Very low settings may be more comfortable but can produce less change.

What is the downtime?

Both treatments usually have little or no downtime. Most people can return to work the same day. Redness, warmth and mild swelling are common for a few hours to a day, and the skin may feel tender for a few days.

Uncommon risks include burns, blisters, pigment changes and, rarely, small dents in fat if heat is concentrated. Monopolar RF is generally avoided in people with pacemakers or other implanted electronic devices. Seek care if you notice blistering, crusting or a dip in the skin.

What results can you expect and how long do they last?

Some people notice slight firming right away, partly from swelling. The main change builds over two to six months as collagen remodels. Typical results are firmer, smoother skin and slightly sharper contours rather than a dramatic lift.

Thermage FLX is often repeated about once a year. Coolfase is newer, so there is less long-term published data. Results last longer with good sun protection, stable weight and healthy habits.

Who does each one suit?

Coolfase may suit people who:

  • Want monopolar RF tightening at a lower typical cost
  • Prioritize comfort and are sensitive to heat
  • Are comfortable with a newer device that has less long-term data

Thermage FLX may suit people who:

  • Want the most established monopolar RF brand
  • Have mild laxity on the face, eyes or body
  • Prefer a device with a long history of use

How to choose between them

  • Choose Thermage FLX if an established track record matters most.
  • Choose Coolfase if comfort and lower cost are priorities.
  • Compare plans by shot count, tip size and areas treated.
  • Ask to see a sealed, genuine tip opened in front of you.
  • Choose an experienced provider who sets realistic expectations.

If you are visiting Korea, both treatments fit easily into a short trip because there is usually no real recovery time. Bring sunscreen and avoid saunas, hot baths and intense exercise for a day or two if your clinic advises it.

Remember that the brand is only one part of the result. The number of shots, how evenly they are placed, the energy level and the area covered usually matter more than the name on the machine.

Frequently asked questions

Is Coolfase FDA cleared?

Yes. FDA records show 510(k) clearance for Coolfase in October 2025 under the general category of electrosurgical devices for electrocoagulation and hemostasis.

Does more cooling mean weaker results?

Cooling is meant to protect the surface while heat reaches the dermis. Whether results match Thermage for a given person has not been shown in large head-to-head studies.

How many shots do I need?

It depends on the area and goals. Ask your clinic how the shots are divided across the face, eyes and neck.

Can I combine RF with HIFU?

Yes, many clinics combine them because they target different layers. Your doctor should plan total energy carefully.

This article is for general information and does not replace a consultation with a doctor. Results and suitability vary from person to person.

Sources: US FDA: 510(k) premarket notification K250852 (Coolfase); Medigate News: Asterasys Coolfase receives FDA 510(k) clearance (Korean); Bausch Health: Solta Medical receives FDA 510(k) clearance for Thermage FLX

Korean vs Imported Botox Brands: Does It Matter?
November 21, 2026
Korean and imported botulinum toxin brands all work the same basic way: they relax targeted muscles to soften wrinkles or slim the jaw. In the korean botox…
Botox vs Skin Botox: Muscles vs Pores
November 21, 2026
Regular Botox is injected into muscles to relax them and soften expression lines such as frown lines and crow's feet. Skin Botox, also called micro Botox…
Botox vs Filler: What Each One Actually Fixes
November 21, 2026
Botox (botulinum toxin) relaxes muscles to soften wrinkles caused by movement, such as frown lines, forehead lines and crow's feet. Fillers, most often…
Silhouette Soft vs Barbed PDO Threads
November 21, 2026
Silhouette Soft is a branded absorbable suspension thread that uses small cones to hold tissue, made from a poly-L-lactic acid-based material, while barbed…
Thread Lift vs HIFU: Which Lasts Longer?
November 21, 2026
A thread lift places absorbable threads under the skin to physically reposition tissue, while HIFU uses focused ultrasound to heat deep layers and trigger…
HIFU vs RF Lifting: What's the Difference?
November 20, 2026
HIFU (high-intensity focused ultrasound) focuses sound energy into small points at fixed depths, including the deep support layer under the skin, to lift…
XERF vs Thermage FLX
November 20, 2026
XERF and Thermage FLX are both monopolar radiofrequency (RF) skin tightening devices that heat the dermis to firm the skin and stimulate new collagen. The…
Cool Soniq vs Ultherapy: Cooled vs Classic Ultrasound
November 20, 2026
Cool Soniq is a Korean high-intensity focused ultrasound (HIFU) device made by Asterasys that cools the skin surface during treatment, while Ultherapy is…
ONDA vs InMode for a Double Chin
November 20, 2026
ONDA uses DEKA's Coolwaves microwave energy to heat fat and the skin above it, while "InMode" in Korean clinics usually means a combination of Forma…
InMode Lifting vs HIFU: Fat Reduction or Lift?
November 19, 2026
In Korea, "InMode lifting" usually means a facial treatment using InMode's Forma and Mini FX handpieces, which warm the skin with radiofrequency and apply…